Alcatel-Lucent 6850-48 Manuale Supplementare
Configuring Global User Lockout Settings
Managing Switch User Accounts
page 8-16
OmniSwitch AOS Release 6 Switch Management Guide
September 2009
By default, the lockout threshold number is set to 0; this means that there is no limit to the number of
failed login attempts allowed, even if a lockout window time period exists. To configure a lockout thresh-
old number, use the
failed login attempts allowed, even if a lockout window time period exists. To configure a lockout thresh-
old number, use the
command. For example:
-> user lockout-threshold 3
) is reached or the admin user manually unlocks the
user account.
Configuring the User Lockout Duration Time
The user lockout duration time specifies the number of minutes a user account remains locked until it is
automatically unlocked by the switch. This period of time starts when the user account is locked out of the
switch. Note that at any point during the lockout duration time, the admin user can still manually unlock
the user account.
automatically unlocked by the switch. This period of time starts when the user account is locked out of the
switch. Note that at any point during the lockout duration time, the admin user can still manually unlock
the user account.
By default, the user lockout duration time is set to 0; this means that there is no automatic unlocking of a
user account by the switch. The locked user account remains locked until it is manually unlocked by the
admin user. To configure a lockout duration time, use the
user account by the switch. The locked user account remains locked until it is manually unlocked by the
admin user. To configure a lockout duration time, use the
command. For example:
-> user lockout-duration 60
).
Manually Locking and Unlocking User Accounts
command is used to manually lock or unlock a user account. This command is
only available to the admin user or a user who has read/write access privileges to the switch.
To lock a user account, enter user lockout and the username for the account. For example,
-> user lockout j_smith
To unlock a user account, enter user unlock and the username for the locked account. For example,
-> user unlock j_smith
In addition to this command, the admin user or users with read/write access privileges can change the user
account password to unlock the account.
account password to unlock the account.
not configured for the switch, then it is only possible to manually unlock a user account with the user
lockout command or by changing the user password.
lockout command or by changing the user password.