Alcatel-Lucent 6850-48 Guida Di Rete

Configuring GVRP

Quick Steps for Configuring GVRP

OmniSwitch AOS Release 6 Network Configuration Guide

page 5-5

3 Port 3 of Switch B receives the advertisement, Switch B creates the dynamic VLAN 50, and Port 3 
becomes a member of VLAN 50.

4 Port 2 advertises VLAN 50, but is not a member of this VLAN.

5 Port 1 on Switch A receives the advertisement, creates dynamic VLAN 50. Port 1 becomes a member 
of VLAN 50.

The resulting configuration is depicted below:

Note. Every port on a switch is not a member of all the VLANs. Only those ports that receive the 
advertisement become members of the VLAN being advertised.

1 Create a VLAN using the 

 command. For example:

-> vlan 5 name "vlan-7"

2 Assign a port to the VLAN using the 

command. For example:

-> vlan 5 port default 3/2

3 Propagate the VLAN out of the assigned port using the 

 command. For example, the 

following command propagates VLAN 5 out of port 3/2:

-> vlan 5 802.1q 3/2

4 Enable GVRP globally on the switch by using the 

 command.

-> gvrp

5 Enable GVRP on the port by using the 

 command. For example, the following command 

enables GVRP on port 3/2 of the

 

switch:

-> gvrp port 3/2

6 Restrict a port from becoming a member of the statically created VLAN by using the

 command. For example, the following command restricts port 3/5 from becom-

ing a member of static VLAN 10:

-> gvrp static-vlan restrict port 3/5 10

 

 

 

Static VLAN: 10, 20, 30
Dynamic VLAN: 50

Static VLAN
Dynamic VLAN: 10, 20, 30, 50

Static VLAN
Dynamic VLAN: 10, 20, 30, 50

Static VLAN 50