Alcatel-Lucent 6850-48 Guida Di Rete
Configuring 802.1AB
Quick Steps for Configuring 802.1AB
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 19-3
Quick Steps for Configuring 802.1AB
command. For
example:
-> lldp 2/47 lldpdu tx-and-rx
2 To control per port notification status about the remote device change on a port, use the
command. For example:
-> lldp 2/47 notification enable
3 To control per port management TLV to be incorporated in the LLDPDUs, use the
command. For example:
-> lldp 2/47 tlv management port-description enable
4 Set the transmit time interval for LLDPDUs. To set the timer for a 50 second delay, use the
command. For example:
-> lldp transmit interval 50
5 Set the minimum time interval between successive LDPDUs. To set the interval for a 20 second delay,
use the
use the
-> lldp transmit delay 20
Note. Optional. Verify the LLDP per port statistics by entering the
command. For
example:
-> show lldp statistics
----------+--------------------------------------+---------------------+----------
| LLDPDU | TLV | Device
Slot/Port| Tx Rx Errors Discards | Unknown Discards | Ageouts
----------+--------+----------+----------+----------+----------+----------+-----
1/23 52 0 0 0 0 0 0
2/47 50 50 0 0 0 0 0
2/48 50 50 0 0 0 0 0
To verify the remote system information, use the
-> show lldp remote-system
Remote LLDP Agents on Local Slot/Port: 2/47,
Chassis ID Subtype = 4 (MAC Address),
Chassis ID = 00:d0:95:e9:c9:2e,
Port ID Subtype = 7 (Locally assigned),
Port ID = 2048,
Port Description = (null),
System Name = (null),
System Description = (null),
Capabilites Supported = none supported,
Capabilites Enabled = none enabled,
For more information about this display, see the OmniSwitch CLI Reference Guide.