Alcatel-Lucent 6850-48 Guida Di Rete

Configuring IPv6

Configuring Route Map Redistribution

OmniSwitch AOS Release 6 Network Configuration Guide

page 26-25

The following example configures the redistribution of OSPFv3 routes into a RIPng network using a route 
map (ospf-to-rip) to filter specific routes:

-> ip route-map ospf-to-rip sequence-number 10 action deny 

-> ip route-map ospf-to-rip sequence-number 10 match tag 5

-> ip route-map ospf-to-rip sequence-number 10 match route-type external type2

-> ip route-map ospf-to-rip sequence-number 20 action permit

-> ip route-map ospf-to-rip sequence-number 20 match ipv6-interface intf_ospf

-> ip route-map ospf-to-rip sequence-number 20 set metric 255

-> ip route-map ospf-to-rip sequence-number 30 action permit

-> ip route-map ospf-to-rip sequence-number 30 set tag 8

-> ip redist ospf into rip route-map ospf-to-rip

The resulting ospf-to-rip route map redistribution configuration does the following:

• Denies the redistribution of Type 2 external OSPFv3 routes with a tag set to five.

• Redistributes into RIPng all routes learned on the intf_ospf interface and sets the metric for such routes 

to 255.

• Redistributes into RIPng all other routes (those not processed by sequence 10 or 20) and sets the tag for 

such routes to eight.