Alcatel-Lucent 6850-48 Guida Di Riferimento
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-47
show router ldp bindings active
Displays the LDP bindings for active IP prefixes.
show router ldp bindings active [prefix ip-prefix/mask]
Syntax Definitions
ip-prefix
The IP address prefix used to identify the IP network. Specify 0 for the
host bits.
host bits.
mask
The IP address mask used to identify the subnet address within the IP
address prefix.
address prefix.
Defaults
By default, active LDP bindings are displayed for all prefixes.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the optional prefix parameter to display active bindings for a specific prefix.
Examples
->show router ldp bindings prefix 10.11.0.6/32
LDP LSR ID: 10.11.0.66
Legend: U - Label In Use, N - Label Not In Use
LDP Prefix Bindings
Prefix Peer IngLbl EgrLbl EgrIntf EgrNextHop
------------------+---------------+-------+------+-------------+---------------
10.11.0.6/32 10.10.0.7 131069N 131069 -- 55.55.55.77
No. of Prefix Bindings: 1
output definitions
Prefix
The IP network address and mask used to identify the prefix binding.
Peer
The IP address of the LDP peer.
IngLbl
The ingress LDP label.
EgrLbl
The egress LDP label.
EgrIntf/LspId
The Label Switch Path (LSP) tunnel ID number (not the LSP path ID
number).
number).
EgrNextHop
The next hop IP address for the egress label.