Alcatel-Lucent 6850-48 Guida Di Riferimento

Virtual Private LAN Service (VPLS) Commands

page 26-70

OmniSwitch CLI Reference Guide

Clears MAC addresses (including static) from the Source Learning MAC address Forwarding Database 
(FDB) for the specified VPLS service. 

clear service id service-id fdb {all | mac mac-address | sap {slot/port | linkagg agg_num} [:0 | :all | 
:qtag1] | mesh-sdp sdp-id[:vc-id]}

An existing VPLS ID number.

Clear all MAC addresses from the FDB for the specified service.

A 48-bit MAC address (aa:bb:cc:dd:ee:ff) to clear from the FDB. 
Clears FDB entries related to this address.

The slot and port number of a service access port that identifies the 
specified SAP. 

The link aggregate ID number (0–31) of a service access link aggre-
gate.that identifies an existing SAP.

The encapsulation type portion of the SAP ID that specifies a null 
encapsulation value for the SAP. Depending on the pre-configured 
encapsulation type for the access port, a SAP using a null encapsulation 
will direct tagged and untagged or only untagged traffic to the associ-
ated service.

The encapsulation type portion of the SAP ID that determines if 
untagged and tagged traffic is mapped to the SAP. Combine this param-
eter with the slot/port or linkagg parameters.

The encapsulation type portion of the SAP ID that identifies a VLAN ID 
tag for SAP traffic. Combine this parameter with the slot/port or link-
agg parameters.

An existing SDP ID number.

A VC ID number that identifies the VC ID portion of each mesh SDP 
binding defined for the service. 

OmniSwitch 9000E

:0 | :all | :qtag

null

service-id value