Alcatel-Lucent 6850-48 Guida Di Riferimento
Virtual Private LAN Service (VPLS) Commands
page 26-110
OmniSwitch CLI Reference Guide
September 2009
show service fdb-mac
Displays the MAC address entry information found in the forwarding database (FDB).
show service fdb-mac [mac-address]
Syntax Definitions
mac-address
A 48-bit MAC address for the static ARP (aa:bb:cc:dd:ee:ff). Valid
addresses are any non-broadcast, non-multicast MAC, and non-IEEE
reserved addresses.
addresses are any non-broadcast, non-multicast MAC, and non-IEEE
reserved addresses.
Defaults
By default, all MAC address entries are displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the optional mac-address parameter with this command to display information for a specific MAC
address.
• Fields that display “N/A” are currently not supported.
Examples
-> show service fdb-mac 00:02:da:16:02:0c
Service Forwarding Database for 00:02:da:16:02:0c
ServId MAC Address Source-Identifier Type
Last-Change
---------+-------------------+---------------------+----------+--------------------
2000 00:02:da:16:02:0c sap:16/6:2 Learn N/A
No. of Entries: 1
Release History
Release 6.4.2; command was introduced.
output definitions
Service Id
The unique service identification number used to identify the service.
MAC Address
The MAC address entry associated with this service.
Source-Identifier
The Service Access Point (SAP) on which the address was learned or
configured.
configured.
Type
The type of MAC address (Learned=dynamically learned address or
Static=management configured permanent address).
Static=management configured permanent address).