Alcatel-Lucent 6850-48 Guida Di Riferimento
Chassis Management and Monitoring Commands
page 2-52
OmniSwitch CLI Reference Guide
September 2009
show temperature
Displays the current operating chassis ambient temperature, as well as current temperature threshold
settings.
settings.
show temperature [number]
Syntax Definitions
number
Specifies the slot (i.e., switch) number within the stack. The valid range
of slot numbers is 1–8, depending on the size of the stack.
of slot numbers is 1–8, depending on the size of the stack.
Defaults
If a slot number is not specified with this command on an OmniSwitch stackable switch, temperature
information for all switches operating in the stack is displayed by default.
information for all switches operating in the stack is displayed by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E.
Usage Guidelines
The number parameter is not an option when using this command on a single-chassis, standalone switch,
such as the OmniSwitch 9000 and 9000E.
such as the OmniSwitch 9000 and 9000E.
Examples
-> show temperature
Temperature for chassis 1
Hardware Board Temperature (deg C) = 41,
Hardware Cpu Temperature (deg C) = N/A,
Temperature Upper Threshold Range (deg C) = 15 to 80,
Temperature Upper Threshold (deg C) = 57,
Temperature Status = UNDER THRESHOLD,
Temperature Danger Threshold (deg C) = 80
Temperature for chassis 2
Hardware Board Temperature (deg C) = 40,
Hardware Cpu Temperature (deg C) = N/A,
Temperature Upper Threshold Range (deg C) = 15 to 80,
Temperature Upper Threshold (deg C) = 57,
Temperature Status = UNDER THRESHOLD,
Temperature Danger Threshold (deg C) = 80
Temperature for chassis 3
Hardware Board Temperature (deg C) = 40,
Hardware Cpu Temperature (deg C) = N/A,
Temperature Upper Threshold Range (deg C) = 15 to 80,
Temperature Upper Threshold (deg C) = 57,
Temperature Status = UNDER THRESHOLD,
Temperature Danger Threshold (deg C) = 80