Alcatel-Lucent 6850-48 Guida Di Riferimento
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide
September 2009
page 2-57
show stack status
Displays the current redundant stacking cable status and token availability for a stacked configuration.
show stack status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
N/A
Examples
-> show stack status
Redundant cable status : present
Tokens used : 8
Tokens available : 24
Release History
Release 6.1; command was introduced.
output definitions
Redundant cable status
Indicates whether a redundant stacking cable is currently installed.
Options include present and not present. To provide added resiliency
and redundancy, it is strongly recommended that a redundant stacking
cable is connected from the top switch in the stack to the bottom switch
in the stack at all times. For more information on stack redundancy,
refer to the Hardware Users Guide.
Options include present and not present. To provide added resiliency
and redundancy, it is strongly recommended that a redundant stacking
cable is connected from the top switch in the stack to the bottom switch
in the stack at all times. For more information on stack redundancy,
refer to the Hardware Users Guide.
Tokens used
The number of tokens used in the current stacked configuration. Each
virtual chassis (also referred to as a stacked configuration) is allocated a
number of tokens per stack. If a switch is added to a stack in which
there are not enough tokens available, the incoming switch is automati-
cally placed in pass-though mode. For detailed information on stack-
related topics, including tokens and pass-through mode, refer to the
Hardware Users Guide.
virtual chassis (also referred to as a stacked configuration) is allocated a
number of tokens per stack. If a switch is added to a stack in which
there are not enough tokens available, the incoming switch is automati-
cally placed in pass-though mode. For detailed information on stack-
related topics, including tokens and pass-through mode, refer to the
Hardware Users Guide.
Tokens available
The number of remaining tokens for any incoming switches in a stack.