Alcatel-Lucent 6850-48 Guida Di Riferimento
IP Commands
page 32-10
OmniSwitch CLI Reference Guide
September 2009
ip router router-id
Configures the router ID for the router. By default, the router primary address of the router is used as the
router ID. However, if a primary address has not been explicitly configured, the router ID defaults to the
address of the first IP interface that becomes operational.
router ID. However, if a primary address has not been explicitly configured, the router ID defaults to the
address of the first IP interface that becomes operational.
ip router router-id ip_address
Syntax Definitions
ip_address
32-bit IP address.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The router ID can be any 32-bit number.
• If the router ID is not a valid IP unicast host address, the BGP identifier is derived from the router
primary address.
• It is recommended that the router ID be explicitly configured on dual CMM chassis or stacked routers.
• The router ID is used by OSPF and BGP to uniquely identify the router in the network.
Examples
-> ip router router-id 172.22.2.115
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaDcrTmConfig
alaDrcTmIpRouterId
Configures the router primary IP address.