Alcatel-Lucent 6850-48 Guida Di Riferimento

IP Commands

page 32-46

OmniSwitch CLI Reference Guide

Matches the specified route type with actual route type of the route.

ip route-map route-map-name [sequence-number number] match route-type {internal | external 
[type1 | type2] | level1 | level2}

no ip route-map route-map-name [sequence-number number] match route-type {internal | external 
[type1 | type2] | level1 | level2}

The name of the route map (up to 20 characters).

A number that links together the route maps. The range is 1–100.

Matches OSPF/BGP internal routes.

Matches OSPF/BGP external routes.

Matches OSPF external Type-1 routes, which gives the full metric 
calculation for the complete path including internal as well as external 
cost.

Matches OSPF external Type-2 routes, which gives the external redistri-
bution metric only to the ASBR.

Matches IS-IS Level-1 routes only. 

Matches IS-IS Level-2 routes only. 

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to delete the match route-type parameter in the route map.

• All route maps having the same name but different sequence numbers are linked together and 

processed in order of increasing sequence number.

• The route-map-name and sequence-number should exist before you configure this match criteria.

50