Alcatel-Lucent 6850-48 Guida Di Riferimento

IP Commands

page 32-56

OmniSwitch CLI Reference Guide

Configures the local preference value for a route being distributed into BGP.

ip route-map route-map-name [sequence-number number] set local-preference value 

no ip route-map route-map-name [sequence-number number] set local-preference value 

The name of the route map (up to 20 characters).

A number that links together the route maps. The range is 1–100.

Configures the local-preference value for routes being redistributed in to 
BGP. The value is between 0 and 4294967295.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to delete the set local-preference parameter in the route map.

• All route maps having the same name but different sequence numbers are linked together and 

processed in order of increasing sequence number.

• The route-map-name and sequence-number should exist before you configure this set criteria.

• The local preference attribute is used to set preference to an exit point from the local autonomous 

system (AS). 

• If there are multiple exit points from the AS, the local preference attribute is used to select the exit 

point for a specific route.

-> ip route-map 111 sequence-number 50 set local-preference 4

-> no ip route-map 111 sequence-number 50 set local-preference 4

Release 6.1.3; command was introduced.

50