Alcatel-Lucent 6850-48 Guida Di Riferimento
IP Commands
OmniSwitch CLI Reference Guide
September 2009
page 32-95
show ip interface
Displays the configuration and status of IP interfaces.
show ip interface [name | emp | vlan vlan id]
Syntax Definitions
name
The name associated with the IP interface.
emp
Displays the configuration and status of the Ethernet Management Port
interface. This parameter is available on OmniSwitch 9000 Series
switches only.
interface. This parameter is available on OmniSwitch 9000 Series
switches only.
vlan_id
VLAN ID (displays a list of IP interfaces associated with a VLAN).
Defaults
By default, all IP interfaces are displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The basic show ip interface command displays information about all configured IP interfaces on the
switch.
• Use the optional vlan parameter to display a list of interfaces configured for the specified VLAN.
• Specify an optional interface name to display detailed information about an individual interface.
• Use the optional emp parameter to display detailed information about the EMP interface. This parame-
ter is available on OmniSwitch 9000 Series switches only.
Examples
-> show ip interface
Total 13 interfaces
Name IP Address Subnet Mask Status Forward Device
--------------------+---------------+---------------+------+-------+--------
EMP 172.22.16.115 255.255.255.0 UP NO EMP
GMRULE 40.1.1.1 255.255.255.0 DOWN NO vlan 40
Loopback 127.0.0.1 255.0.0.0 UP NO Loopback
client 60.1.1.1 255.255.255.0 DOWN NO vlan 60
gbps 5.5.5.5 255.255.255.0 DOWN NO vlan 7
if222 30.1.5.1 255.0.0.0 UP YES vlan 222
ldap_client1 173.22.16.115 255.255.255.0 UP YES vlan 173
ldap_server1 174.22.16.115 255.255.255.0 UP YES vlan 174
radius_client3 110.1.1.101 255.255.255.0 UP YES vlan 30
vlan-2 0.0.0.0 0.0.0.0 DOWN NO unbound
gre-1 24.24.24.1 255.255.255.0 UP YES GRE tunnel
ipip-1 25.25.25.1 255.255.255.0 UP YES IPIP tunnel
vlan-23 23.23.23.1 255.255.255.0 UP YES vlan 23