Manualsbrain.com
  1. Manuali
  2. Marche
  3. Alcatel-Lucent
  4. 6850-48
  5. Guida Di Riferimento

Alcatel-Lucent 6850-48 Guida Di Riferimento

Scarica
Pagina di 3444
IP Commands
page 32-116
OmniSwitch CLI Reference Guide
September 2009
show ip protocols
Displays switch routing protocol information and status.
show ip protocols
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
This command also displays the switch’s primary IP address and router ID, if configured, and debug infor-
mation.
Examples
-> show ip protocols
Router ID                               = 10.255.11.243,
Primary addr                            = 10.255.11.243,
RIP status                              = Not Loaded,
OSPF status                             = Not Loaded,
BGP status                              = Not Loaded,
DVMRP status                            = Not Loaded,
PIMSM status                            = Not Loaded,
Debug level                             = 1,
Debug sections                          = error, 
output definitions
Router ID
The set routing ID. The router ID is how the router is identified in IP. 
Primary addr
The primary interface address the route uses.
RIP status
Whether RIP is loaded or not.
OSPF status
Whether OSPF is loaded or not.
BGP status
Whether BGP is loaded or not.
DVMRP status
Whether DVMRP is loaded or not.
PIMSM status
Whether PIMSM is loaded or not.
Debug level
What the current router debug level is.
Debug sections
What types of debugging information are being tracked.