Alcatel-Lucent 6850-48 Guida Di Riferimento
Power over Ethernet (PoE) Commands
OmniSwitch CLI Reference Guide
September 2009
page 4-17
lanpower capacitor-detection
Enables or disables the capacitor detection method.
lanpower slot capacitor-detection {enable | disable}
Syntax Definitions
slot
The particular slot on which the capacitor detection method is being
enabled or disabled.
enabled or disabled.
enable
Enables the capacitor detection method.
disable
Disables the capacitor detection method.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
The capacitor detection method should only be enabled if there are legacy IP phones attached to the corre-
sponding slot—this feature is not compatible with IEEE specification 802.3af. Please contact your Alca-
tel-Lucent sales engineer or Customer Support representative to find out which Alcatel-Lucent IP phones
models need capacitive detection enabled.
sponding slot—this feature is not compatible with IEEE specification 802.3af. Please contact your Alca-
tel-Lucent sales engineer or Customer Support representative to find out which Alcatel-Lucent IP phones
models need capacitive detection enabled.
Examples
-> lanpower 3 capacitor-detection enable
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaPethMainTable
alaPethMainPseCapacitorDetect
parameter
default
enable | disable
disable
Displays capacitor detection method status.