Alcatel-Lucent 6850-48 Guida Di Riferimento

RDP Commands

OmniSwitch CLI Reference Guide

page 35-13

Configures the preference level for each IP address advertised on the specified RDP interface. The end 
host selects the address with the highest preference level to use as its default router, if the host is not 
already redirected or configured to use another default router for a particular destination.

ip router-discovery interface name preference-level level

The IP interface name that was defined at the time the IP interface was 
configured. 

Any positive, integer value.The higher the value, the higher the prece-
dence.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The RDP interface preference level value is not active unless RDP is enabled on the switch and the 

specified interface is also enabled.

• Set the preference level higher to encourage the use of an advertised router IP address.

• Set the preference level lower to discourage the use of an advertised router IP address.

• The preference level of an advertised router IP address is compared only to the preference levels of 

other addresses on the same subnet.

-> ip router-discovery interface Marketing preference-level 10

-> ip router-discovery interface Accounting preference-level 50

Release 6.1; command was introduced.

0