Alcatel-Lucent 6850-48 Guida Di Riferimento

RIP Commands

OmniSwitch CLI Reference Guide

page 37-15

Specifies whether or not RIP can add host routes (routes with a 32-bit mask) to the RIP table.

N/A

The default is to enable a default host route.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to prevent RIP from adding host routes to the RIP table.

• When enabled, RIPv1 will interpret an incoming route announcement that contains any 1 bit in the host 

portion of the IP address as a host route, implying a mask of 255.255.255.255.

-> ip rip host-route

Release 6.1; command was introduced.

alaProtocolRip

alaRipHostRouteSupport

Displays the RIP Routing Database.