Alcatel-Lucent 6850-48 Guida Di Riferimento
RIP Commands
page 37-18
OmniSwitch CLI Reference Guide
September 2009
ip rip interface auth-key
Configures the text string that will be used as the password for the RIP interface. If you configure simple
or MD5 authentication, you must configure a text string that will be used as the password for the RIP
interface.
or MD5 authentication, you must configure a text string that will be used as the password for the RIP
interface.
ip rip interface {interface_name} auth-key string
Syntax Definitions
interface_name
The name of the interface.
string
16-byte text string.
Defaults
The default authentication string is a null string.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Regardless of which authentication type is used (simple or MD5), both switches on either end of a link
must share the same password.
must share the same password.
Examples
-> ip rip interface rip-1 auth-key nms
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
MIB Objects
rip2IfConfTable
rip2IfConfAddress
rip2IfConfAuthKey
Configures the type of authentication that will be used for the RIP
interface.
interface.