Alcatel-Lucent 6850-48 Guida Di Riferimento
RIP Commands
OmniSwitch CLI Reference Guide
September 2009
page 37-23
show ip rip
Displays the RIP status and general configuration parameters (e.g., forced hold-down timer).
show ip rip
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show ip rip
Status = Enabled
Number of routes = 9
Host Route Support = Enabled
Route Tag = 42
Update interval = 30
Invalid interval = 180
Garbage interval = 120
Holddown interval = 0
Forced Hold-Down Timer = 0
output definitions
Status
RIP status (Enabled or Disabled).
Number of routes
Number of network routes in the RIP routing table.
Host Route Support
Host route status (Enabled or Disabled). Indicates whether or not RIP
can add host routes (routes with a 32-bit mask) to the RIP table.
can add host routes (routes with a 32-bit mask) to the RIP table.
Route Tag
Route tag value for RIP routes generated by the switch. Valid values are
0–2147483647.
0–2147483647.
Update interval
The RIP routing update interval, in seconds. Valid range is 1–120.
Default is 30.
Default is 30.
Invalid interval
The RIP invalid timer value, in seconds. Valid range is 3–360. Default
is 180.
is 180.
Garbage interval
The RIP garbage timer value, in seconds. Valid range is 0–180. Default
is 120.
is 120.