Alcatel-Lucent 6850-48 Guida Di Riferimento
IPX Commands
page 38-2
OmniSwitch CLI Reference Guide
September 2009
ipx routing
Enables/disables IPX routing on the switch. When IPX routing is enabled and an IPX router port has been
created for a VLAN on the switch, the switch is able to exchange routing information with external IPX
routers; and hosts connected to VLANs with IPX router ports are able to communicate.
created for a VLAN on the switch, the switch is able to exchange routing information with external IPX
routers; and hosts connected to VLANs with IPX router ports are able to communicate.
ipx routing
no ipx routing
Syntax Definitions
N/A
Defaults
IPX routing is enabled by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
• Use the no form of this command to disable IPX routing.
• You must configure an IPX router port on a VLAN for the switch to communicate with other VLAN
router ports. You can only create one IPX router port per VLAN. VLAN router ports are not active
until at least one active physical port is assigned to the VLAN. See
until at least one active physical port is assigned to the VLAN. See
Examples
-> ipx routing
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
ipxBasicSysTable
ipxBasicSysInstance
ipxBasicSysExistState
Displays IPX routing table information.