Alcatel-Lucent 6850-48 Guida Di Riferimento
IPX Commands
OmniSwitch CLI Reference Guide
September 2009
page 38-7
clear ipx route
Flushes the IPX
R
outing Information Protocol (RIP) Routing and/or Service Address Protocol (SAP)
Bindary Tables. RIP Routing Tables are used to keep track of optimal destinations to remote IPX
networks. The SAP Bindary Table contains information about available network services. NetWare work-
stations use SAP to obtain the network addresses of NetWare servers. IPX routers use SAP to gather
service information and then share it with other IPX routers. The RIP Table and SAP Bindery Table can
contain a maximum of 5,000 entries each. This number includes configured VLAN routes.
networks. The SAP Bindary Table contains information about available network services. NetWare work-
stations use SAP to obtain the network addresses of NetWare servers. IPX routers use SAP to gather
service information and then share it with other IPX routers. The RIP Table and SAP Bindery Table can
contain a maximum of 5,000 entries each. This number includes configured VLAN routes.
clear ipx route {rip | sap | all}
Syntax Definitions
rip
Flushes all RIP routes from the RIP Routing Table.
sap
Flushes all SAP routes from the SAP Bindary Table.
all
Flushes both the RIP Routing and SAP Bindary Tables.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
• When you flush the table(s), only routes learned by RIP and SAP are deleted. Static routes are not
removed. Use the no form of the
• After the routes are cleared, the switch begins soliciting RIPs and SAPs from adjacent routers and RIP
and SAP information is re-learned.
Examples
-> clear ipx route all
Release History
Release 6.1; command was introduced.