Alcatel-Lucent 6850-48 Guida Di Riferimento
IPX Commands
page 38-24
OmniSwitch CLI Reference Guide
September 2009
show ipx interface
Displays the current IPX configuration information.
show ipx interface [vlan]
Syntax Definitions
vlan
VLAN that you want to display.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
• To display IPX information for all VLANs use only the basic command syntax (e.g., show ipx inter-
face). Do not enter the optional vlan parameter.
• This command is only functional if RIP is enabled on an IPX VLAN interface.
Examples
-> show ipx interface
VLAN State Address Encapsulation
---- ------------- -------------------------- -------------
4 active 00000020.00d0956a7ca2 ETHERNET2
5 active 00000040.00d0956a7ca2 NOVELL
output definitions
VLAN
VLAN number.
State
VLAN status (up/down and active/inactive).
Address
Interface IPX address.
Encapsulation
Type of port encapsulation used for the interface (Ethernet, FDDI, and
Token Ring).
Token Ring).