Alcatel-Lucent 6850-48 Guida Di Riferimento
BFD Commands
page 39-34
OmniSwitch CLI Reference Guide
September 2009
show ip bfd-std interfaces
Displays the BFD interface configuration table.
show ip bfd-std interfaces [interface-name]
Syntax Definitions
interface-name
The name of the BFD interface.
Defaults
By default, the configuration for all BFD interfaces is displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Enter an interface name to display information for a specific BFD interface.
Examples
->show ip bfd-std interfaces
Interface Admin Tx Min Rx
Oper
Name
Mode Status Interval Interval
Multiplier
Status
-----------+------------+---------+---------+---------+-----------+----------
vlan-10
ASYNCHRONOUS enabled 100 100 3
UP
vlan-20
ASYNCHRONOUS disabled 0 0 5
DOWN
-> show ip bfd-std interfaces vlan-10
Interface IP Address: = 215.20.10.1,
Admin Status: = Enabled,
Mode: =
ASYNCHRONOUS,
Echo Status: = Disabled,
Transmit Interval: = 100,
Receive Interval: = 100,
Multiplier: = 3,
Echo Interval: = 100,
L2 Hold Down Interval
= 100
output definitions
Interface address
Refers to BFD Interface address.
Admin status
Refers to BFD interface admin status.
Mode
Refers to BFD interface operational mode.
Echo status
Refers to Interface Echo functionality status.
Transmit Interval
Refers to BFD interface Tx interval.
Receive Interval
Refers to BFD interface Rx interval.
Multiplier
Refers to BFD interface Multiplier.