Alcatel-Lucent 6850-48 Guida Di Riferimento

OSPF Commands

OmniSwitch CLI Reference Guide

page 41-39

Configures the OSPF interface type.

ip ospf interface {interface_name} type {point-to-point | point-to-multipoint | broadcast | non-broad-
cast}

The name of the interface.

Sets the interface to be a point-to-point OSPF interface.

Sets the interface to be a point-to-multipoint OSPF interface.

Sets the interface to be a broadcast OSPF interface.

Sets the interface to be NBMA (Non Broadcast Multi Access) OSPF 
interface.

OmniSwitch 6850, 6855, 9000, 9000E

• This command sets an interface to be broadcast, non-broadcast, point-to-point, or point-to-multipoint.

• If the type is non-broadcast or point-to-multipoint, static neighbors should be configured.

-> ip ospf interface vlan-101 type non-broadcast

Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.