Alcatel-Lucent 6850-48 Guida Di Riferimento
OSPF Commands
OmniSwitch CLI Reference Guide
September 2009
page 41-47
ip ospf restart-interval
Configures the grace period for achieving a graceful OSPF restart.
ip ospf restart-interval [seconds]
Syntax Definitions
seconds
The hitless restart timeout interval, in seconds. The valid range is
0–1800.
0–1800.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch chassis-based switches with a single CMM or OmniSwitch
stackable switches in a standalone configuration.
stackable switches in a standalone configuration.
• On OmniSwitch 6850 switches, a graceful restart is supported only on active ports (i.e., interfaces) that
are on the secondary or idle modules in a stack during a takeover. It is not supported on ports on a
primary switch in a stack.
primary switch in a stack.
Example
-> ip ospf restart-interval 600
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaProtocolOspf
alaOspfRestartInterval
parameter
default
seconds
120
Administratively enables and disables support for the graceful
restart feature on an OSPF router.
restart feature on an OSPF router.
Displays the OSPF graceful restart related configuration and status.