Alcatel-Lucent 6850-48 Guida Di Riferimento
IS-IS Commands
OmniSwitch CLI Reference Guide
September 2009
page 43-15
ip isis lsp-wait
Configures the intervals between the first, second and subsequently generated LSPs.
ip isis lsp-wait {max-wait | initial-wait | second-wait} seconds
no ip isis lsp-wait {max-wait | initial-wait | second-wait}
Syntax Definitions
max-wait
Specifies the maximum interval between two successive LSPs, in
seconds. The valid range is 1–120.
seconds. The valid range is 1–120.
initial-wait
Specifies the initial LSP generation delay, in seconds. The valid range is
0–100.
0–100.
second-wait
Specifies the time interval between the first and second generated LSPs,
in seconds. The valid range is 1–100.
in seconds. The valid range is 1–100.
seconds
Specifies the time interval.
Defaults
Platforms Supported
OmniSwitch 6850, 9000, 9000E
Usage Guidelines
• Use the no form of this command to restore the default value.
• Successive LSPs are generated at increasing second-wait interval until a maximum value is reached.
Examples
-> ip isis lsp-wait max-wait 25
-> no ip isis lsp-wait initial-wait
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.
Release 6.3.1; support for OmniSwitch 9000 added.
parameter
default
seconds (max-wait)
5
seconds (initial-wait)
0
seconds (second-wait)
1