Alcatel-Lucent 6850-48 Guida Di Riferimento
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-147
ip bgp policy route-map weight
Configures a BGP weight value to be assigned to inbound routes when a match is found.
ip bgp policy route-map name sequence_number weight value
Syntax Definitions
name
The route map name.
sequence_number
The route map sequence number. The valid range is 1–255.
value
The weight value. The valid range is 0–65535.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
This command sets the weight value for routes that pass the route map match criteria. It is only applicable
for the inbound policy. The default value of zero means that the weight is not changed by the route map.
for the inbound policy. The default value of zero means that the weight is not changed by the route map.
Examples
-> ip bgp policy route-map routemap1 1 weight 500
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapWeight
parameter
default
value
0
Configures an AS path matching regular expression primitive in the
route map.
route map.