Alcatel-Lucent 6850-48 Guida Di Riferimento

PIM Commands

OmniSwitch CLI Reference Guide

page 45-17

Specifies the data rate, in bits per second (bps), at which the Rendezvous Point (RP) will attempt to switch 
to native forwarding by issuing a source-specific (S, G) Join message toward the source.

ip pim rp-threshold bps

The data rate value, in bits per second, at which the RP will attempt to 
switch to native forwarding (0–2147483647).

OmniSwitch 6850, 6855, 9000, 9000E

• This command is supported only in the sparse mode.

• To disable the RP threshold feature, specify a bits per second value of 0. When the RP threshold is 

disabled, the RP will never initiate an (S, G) Join message toward the source; the packets will be 
register-encapsulated to the RP.

 

It will issue a (S, G) Join message upon receiving the first data packet, 

if its bits per second value is 1.

• To view the current RP threshold, use the 

-> ip pim rp-threshold 131072

Release 6.1.1; command was introduced.

alaPimsmGlobalConfig

alaPimsmRPThreshold

1

Displays the global parameters for PIM sparse mode.