Alcatel-Lucent 6850-48 Guida Di Riferimento
PIM Commands
OmniSwitch CLI Reference Guide
September 2009
page 45-59
show ip pim cbsr
Displays the Candidate-BSR information that is used in the Bootstrap messages.
show ip pim cbsr
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show ip pim cbsr
CBSR Address = 214.0.0.7,
Status = enabled,
CBSR Priority = 0,
Hash Mask Length = 30,
Elected BSR = False,
Timer = 00h:00m:00s
Release History
Release 6.3.1; command was introduced.
output definitions
CBSR Address
The 32-bit address that the local router uses to advertise itself as a Can-
didate-BSR.
didate-BSR.
Status
The current status of this entry. The status is shown as enabled only if
the PIM-SM is globally enabled and the PIM interface is enabled.
the PIM-SM is globally enabled and the PIM interface is enabled.
CBSR Priority
The value for the local router as a Candidate-BSR. The higher the
value, the higher the priority.
value, the higher the priority.
Hash Mask Length
The 32-bit mask length that is advertised in the Bootstrap messages (the
length of the mask is used in the hash function when computing the
Rendezvous Point (RP) for a multicast group.
length of the mask is used in the hash function when computing the
Rendezvous Point (RP) for a multicast group.
Elected BSR
Specifies whether the local router is the elected BSR.
Timer
The time value that is remaining before the local router originates the
next Bootstrap message. This value is zero if this router is not the
elected BSR.
next Bootstrap message. This value is zero if this router is not the
elected BSR.