Alcatel-Lucent 6850-48 Guida Di Riferimento
PIM Commands
page 45-66
OmniSwitch CLI Reference Guide
September 2009
show ip pim groute
Displays all (*,G) state that the IPv4 PIM has.
show ip pim groute [group_address]
Syntax Definitions
group_address
A 32-bit multicast address. If an IP address is not specified, the current
PIM status for all multicast route entries are displayed.
PIM status for all multicast route entries are displayed.
Defaults
By default, entire (*,G) routing table is displayed. To view more detailed (*,G) state information about a
particular group, specify the group address in the command line.
particular group, specify the group address in the command line.
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
When the group_address is specified in the command line, the detailed information displayed also
includes the detailed state of every outgoing interface.
includes the detailed state of every outgoing interface.
Examples
-> show ip pim groute
Total 1 (*,G)
Group Address RP Address RPF Interface Upstream Neighbor UpTime
---------------+--------------+-------------------+-----------------+-----------
225.0.0.0 212.61.60.8 vlan-30 212.61.30.7 00h:01m:43s
225.0.0.1 212.61.60.8 vlan-30 212.61.30.7 00h:01m:43s
-> show ip pim groute 225.0.0.0
(*,225.0.0.0)
UpTime = 00h:01m:49s
RP Address = 212.61.60.8,
PIM Mode = ASM,
PIM Mode Origin = BSR,
Upstream Join State = Joined,
Upstream Join Timer = 00h:00m:11s,
Upstream Neighbor = 212.61.30.7,
RPF Interface = vlan-30,
RPF Next Hop = 212.61.30.7,
RPF Route Protocol = OSPF,
RPF Route Address = 212.61.60.0/24,
RPF Route Metric Pref = 110,
RPF Route Metric = 2,
Interface Specific State:
vlan-4
UpTime = 00h:01m:49s,