Manualsbrain.com
  1. Manuali
  2. Marche
  3. Alcatel-Lucent
  4. 6850-48
  5. Guida Di Riferimento

Alcatel-Lucent 6850-48 Guida Di Riferimento

Scarica
Pagina di 3444
PIM Commands
OmniSwitch CLI Reference Guide
September 2009
page 45-75
ipv6 pim sparse status
Enables or disables the IPv6 PIM-SM (sparse mode) globally for IPv6.
ipv6 pim sparse status {enable | disable}
Syntax Definitions
enable
Enables PIM-SM globally for IPv6.
disable
Disables PIM-SM globally for IPv6.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
This command must be set to enable before PIM-SM can run on the switch. In addition, the ip load pim 
command must be executed. Refer to 
Examples
-> ipv6 pim sparse status enable
-> ipv6 pim sparse status disable
Release History
Release 6.3.1; command was introduced.
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmV6AdminStatus
parameter
default
enable | disable
disable
Enables or disables the PIM protocol on a specific interface.
Dynamically loads PIM to memory.
Displays the status of the various global parameters for the IPv6 
PIM sparse mode.