Alcatel-Lucent 6850-48 Guida Di Riferimento

PIM Commands

OmniSwitch CLI Reference Guide

page 45-87

Enables or disables an RP to attempt switching to native forwarding upon receiving the first register-
encapsulated packet in the IPv6 PIM domain. 

Enables the RP to switch to native forwarding.

Disables the RP from switching to native forwarding.

OmniSwitch 6850, 6855, 9000, 9000E

• You cannot specify a pre-configured threshold, such as the RP threshold, as you would do for IPv4 

PIM

.

• This command is supported only in the sparse mode.

-> ipv6 pim rp-switchover enable

-> ipv6 pim rp-switchover disable

Release 6.3.1; command was introduced.

alaPimsmGlobalConfig

alaPimsmV6RPSwitchover

Displays the status of the various global parameters for the IPv6 
PIM sparse mode.