Alcatel-Lucent 6850-48 Guida Di Riferimento
DVMRP Commands
OmniSwitch CLI Reference Guide
September 2009
page 46-5
ip dvmrp flash-interval
Configures the minimum flash update interval value. The flash update interval defines how often routing
table change messages are sent to neighboring DVMRP routers.
table change messages are sent to neighboring DVMRP routers.
ip dvmrp flash-interval seconds
Syntax Definitions
seconds
Specifies the interval value, in seconds (5–86400).
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
Because routing table change messages are sent between the transmission of complete routing tables, the
flash update interval value must be lower than the route report interval.
flash update interval value must be lower than the route report interval.
Examples
-> ip dvmrp flash-interval 5
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpFlashUpdateInterval
parameter
default
seconds
5
Displays global DVMRP parameters.