Alcatel-Lucent 6850-48 Guida Di Riferimento
DVMRP Commands
page 46-22
OmniSwitch CLI Reference Guide
September 2009
ip dvmrp debug-level
Defines the level of debugging for DVMRP protocol on the switch.
ip dvmrp debug-level level
Syntax Definitions
level
Specifies the DVMRP debug level (0–255). Higher debug-levels will
include all messages that correspond to a lower value. For example, a
debug level of 2 will display all messages for level 1 and level 2. As a
rule of thumb, higher levels will display more detailed messages; lower
levels will display more basic messages.
include all messages that correspond to a lower value. For example, a
debug level of 2 will display all messages for level 1 and level 2. As a
rule of thumb, higher levels will display more detailed messages; lower
levels will display more basic messages.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
When the debug level is set to 0, DVMRP debug logging is turned off.
Examples
-> ip dvmrp debug-level 2
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
N/A
parameter
default
level
1
Enables or disables DVMRP debugging for a specified message
type, or for all message types.
type, or for all message types.
Displays the current level of debugging for DVMRP protocol on the
switch, as well as the current status for all debugging types.
switch, as well as the current status for all debugging types.