Alcatel-Lucent 6850-48 Guida Di Riferimento

DVMRP Commands

page 46-32

OmniSwitch CLI Reference Guide

Displays DVMRP next hop entries. This command is used to show the list of next hops on outgoing inter-
faces to which IP multicast datagrams from particular sources are routed.

show ip dvmrp nexthop [ip_address ip_mask]

Specifies a source IP address for which DVMRP next hop entries will 
be displayed.

Specifies a source IP mask for which DVMRP next hop entries will be 
displayed.

N/A

OmniSwitch 6850, 6855, 9000, 9000E

If an IP address and IP mask are not specified, the entire DVMRP Next Hop table is displayed.

-> show ip dvmrp nexthop 172.22.2.115 255.255.255.0

Src Address/Mask       Interface Name     Vlan    Hop Type

--------------------+--------------------+-------+----------

172.22.2.115/24

vlan-22      

22

branch

Release 6.1; command was introduced.

N/A

The 32-bit source IP address, along with the mask length, shown in bits. 
The source IP address and mask are separated by a slash ( / ).

The name of the interface.

The associated VLAN ID.

The hop type of the associated entry. Options include leaf or branch.
If the next hop VLAN has a DVMRP neighbor attached to it, the hop 
type will be displayed as branch.