Alcatel-Lucent 6850-48 Guida Di Riferimento
File Management Commands
OmniSwitch CLI Reference Guide
September 2009
page 7-3
cd
Changes the switch’s current working directory.
cd [path]
Syntax Definitions
path
Specifies a particular working directory. If no path is specified, the
switch’s working directory is changed to the top level.
switch’s working directory is changed to the top level.
Defaults
The switch’s default working directory is /flash.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Up to 255 characters may be used for a fully qualified path.
• A path can contain up to a maximum of seven (7) directories, including /flash.
• As with files names, up to thirty-two (32) characters may be used for a directory name.
• File and directory names can include only the following character types: a-z, A-Z, 0-9, dashes (-),
dots (.), and underscores (_).
• This command can also be used on the secondary CMM.
Examples
-> cd
-> cd test_path
Release History
Release 6.1; command was introduced.