Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

page 53-32

OmniSwitch CLI Reference Guide

Configures a service with a destination TCP port or port range that may be used as part of a policy service 
group or included as part of a policy condition.

policy service service_name destination tcp port port[-port]

no policy service service_name 

policy service service_name no destination tcp port

The name of the service (up to 31 alphanumeric characters).

The well-known port number (or port range) for the desired TCP 
service. For example, the port number for Telnet is 23. A port range 
should be separated by a hyphen (for example, 22-23).

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a service from the configuration, or to remove parameters 

from a particular service.

• This command is a shortcut for the 

• A policy service may be grouped in a policy group using the policy service group command. A policy 

condition may then be associated with the service group.

• If the snapshot command is entered after the policy service command is configured, the resulting 

ASCII file will include the following additional syntax for the policy service command: 

This syntax indicates how the service was created. The cli and ldap options may be changed by a user 
modifying the ASCII file; however, changing this setting is not recommended. The blt option indicates 
a built-in object, this setting is not configurable.

-> policy service service4 destination tcp port 23

Release 6.1; command was introduced.