Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-43

Configures a source IP address for a policy condition.

policy condition condition_name source ip ip_address [mask netmask]

policy condition condition_name no source ip 

The name of the condition.

The source IP address of the Layer 3 flow.

The mask for the source IP address.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If a mask is not specified, the IP address is assumed to be a host address.

• A source IP address and a source IP network group cannot be specified in the same condition.

• Use the no form of the command to remove a source IP address from a condition; however, at least one 

classification parameter must be associated with a condition.

-> policy condition cond3 source ip 173.201.18.3

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about a particular policy condition configured on the 
switch.