Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-71

Configures an ethertype value to use for traffic classification.

policy condition condition_name ethertype etype

policy condition condition_name no ethertype

The name of the condition.

The ethertype value, in the range 1536–65535 or 0x600–0xffff hex.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an ethertype value from a condition; however, at least one 

classification parameter must be associated with a condition.

• Enter a numeric or equivalent hex value for the etype.

-> policy condition cond12 ethertype 8137

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about policy conditions configured on the switch.