Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

page 53-78

OmniSwitch CLI Reference Guide

Associates a policy service group with a policy condition.

policy condition condition_name service group service_group

policy condition condition_name no service group

The name of the condition.

The service group name. Service groups are configured through the 
policy service group command. See 

 for more information 

about this command.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove a service group from a condition; however, at least one 

classification parameter must be associated with a condition.

• A policy condition that specifies a service group cannot also specify a service, IP protocol, source IP 

port, or destination IP port.

-> policy condition cond12 service group servgroup2

Release 6.1; command was introduced.

Configures a service group and its associated services.

Creates a policy condition.

Applies configured QoS and policy settings to the current configuration. 

Shows information about policy conditions configured on the switch.