Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

page 53-108

OmniSwitch CLI Reference Guide

Configures a destination VLAN (multicast only) for a policy condition. Use the no form of the command 
to remove a destination VLAN from a condition.

policy condition condition_name destination vlan vlan_id

policy condition condition_name no destination vlan

The name of the condition. May be an existing condition name or a new 
condition.

The destination VLAN ID for the flow.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a destination VLAN from a condition; however, at least 

one classification parameter must be associated with a condition.

• Note that this condition is supported for multicast only policies.

-> policy condition cond4 destination vlan 3

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about policy conditions configured on the switch.