Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

page 53-114

OmniSwitch CLI Reference Guide

Configures a source port number for a policy condition. Use the no form of the command to remove a 
source port number from a condition.

policy condition condition_name source port slot/port[-port]

policy condition condition_name no source port

The name of the condition. May be an existing condition name or a new 
condition.

The slot and port number (or range of ports) on which the frame is 
received. 

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Use the no form of the command to remove a source port from a condition; however, at least one classifi-
cation parameter must be associated with a condition.

-> policy condition cond2 source port 3/1

-> policy condition cond3 source port 3/2-4

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about policy conditions configured on the switch.