Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-139

Configures a value to be set in the 802.1p bits of the 802.1Q byte of an outgoing frame for traffic that 
matches a policy with this action.

policy action action_name 802.1p 802.1p_value 

policy action action_name no 802.1p

The name of the action.

The priority value to be set in 802.1Q frames. Values range from 0 
(lowest priority) to 7 (highest priority). 

N/A 

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove an 802.1p value from a policy action.

• Note that specifying both ToS and DSCP in the same action is not allowed.

-> policy action action4 802.1p 7

-> policy action action4 no 802.1p

Release 6.1; command was introduced. 

Applies configured QoS and policy settings to the current configuration. 

Creates a policy action.

Displays information about policy actions.