Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

page 53-186

OmniSwitch CLI Reference Guide

Specifies an IP protocol for a hypothetical packet to show how the QoS software in the switch will handle 
the packet.

show policy classify {l2 | l3 | multicast} [applied] ip protocol protocol

Uses the Layer 2 classifier for the hypothetical packet.

Uses the Layer 3 classifier for the hypothetical packet. 

Uses the multicast IGMP classifier for the hypothetical packet. 

Indicates that only applied policies should be examined. 

The IP protocol number, for example, 6.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use this command to determine if the switch will classify the traffic condition specified and match it to 

a policy. By default the classifier only tests pending policies (policies that have not yet been applied). 
Use the applied keyword to test only those policies that have been applied.

• Use the qos apply command to activate policies.

-> show policy classify l3 ip protocol 6

See the output example given on 

 for more information about the potential screen display.

Release 6.1; command was introduced.