Alcatel-Lucent 6850-48 Guida Di Riferimento
IP Multicast Switching Commands
OmniSwitch CLI Reference Guide
September 2009
page 55-45
ip multicast helper-address
Specifies the destination IP address of a relay host where IGMP host reports and Leave messages are to be
sent.
sent.
ip multicast helper-address [ip-address]
Syntax Definitions
ip-address
The IP address of the relay host
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• After the destination IP address is specified, the IPMS reporting feature is enabled.
• To disable the IPMS reporting feature, 0.0.0.0 is used as the IP address. It can also be disabled by omit-
ting the IP address from the command.
Examples
-> ip multicast helper-address 10.1.1.198
-> ip multicast helper-address 0.0.0.0
Release History
Release 6.4.2; command was introduced.
Related Commands
MIB Objects
alaIgmp
alaIgmpHelperAddress
alaIgmpHelperAddressType
Displays the IP Multicast Switching and Routing status and the general
configuration parameters on the specified VLAN or on the system if no
VLAN is specified.
configuration parameters on the specified VLAN or on the system if no
VLAN is specified.