Alcatel-Lucent 6850-48 Guida Di Riferimento
Switch Logging Commands
page 60-16
OmniSwitch CLI Reference Guide
September 2009
show swlog
Displays switch logging information (e.g., switch logging status, log devices, application IDs with non-
default severity level settings).
default severity level settings).
show swlog
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
This command can also be used on the secondary CMM.
Examples
-> show swlog
Operational Status : On,
Log Device 1 : flash,
Log Device 2 : console,
Log Device 3 : ipaddr 1.1.1.1 remote command-log,
Syslog FacilityID : local0(16),
Remote command-log : Disabled,
Console Display Level : debug3 (9),
All Applications Trace Level : info (6)
output definitions
Operational Status
The operational status of switch logging.
Log Device
The device where the output is being logged.
Syslog FacilityID
The facility ID that switch logging will include in the priority (PRI)
section of the event message.
section of the event message.
Remote command-log
The status of the remote command-log feature.
Console Display Level
The Consol Display Level. Levels include alarm (2), error (3), alert (4),
warning (5), info (6), debug1 (7), debug2 (8), and debug3 (9).
warning (5), info (6), debug1 (7), debug2 (8), and debug3 (9).
All Applications Trace Level
The Severity Level of the Application ID. Levels include alarm (2),
error (3), alert (4), warning (5), info (6), debug1 (7), debug2 (8), and
debug3 (9).
error (3), alert (4), warning (5), info (6), debug1 (7), debug2 (8), and
debug3 (9).