Alcatel-Lucent 6850-48 Guida Di Riferimento
SNMP Commands
page 10-6
OmniSwitch CLI Reference Guide
September 2009
show snmp station
Displays the current SNMP station status.
show snmp station
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show snmp station
ipAddress/udpPort status protocol user
-------------------------------------------------------------------------------
199.199.100.200/8010 enable v3 NMSuserV3MD5DES
199.199.101.201/111 disable v2 NMSuserV3MD5
199.199.102.202/8002 enable v1 NMSuserV3SHADES
199.199.103.203/8003 enable v3 NMSuserV3SHADES
199.199.104.204/8004 enable v3 NMSuserV3SHA
The following is an example of the output display using IPv6.
-> show snmp station
ipAddress/udpPort status protocol user
---------------------------------------------------+---------+--------+------
172.21.160.32/4000 enable v3 abc
172.21.160.12/5000 enable v3 user1
0300:0000:0000:0000:0211:d8ff:fe47:470b/4001 enable v3 user2
0300:0000:0000:0000:0211:d8ff:fe47:470c/5001 enable v2 abc
output definitions
IPAddress
IP Address of the SNMP management station that replayed the trap.
Note: OmniSwitch stackable and chassis-based switches support both
IP and IPv6 SNMP stations.
Note: OmniSwitch stackable and chassis-based switches support both
IP and IPv6 SNMP stations.
UDP Port
UDP port number.
Status
The Enabled/Disabled status of the SNMP management station.
Protocol
The version of SNMP set for this management station.
User
The user account name.