Alcatel-Lucent 6850-48 Guida Di Riferimento
Link Aggregation Commands
page 12-20
OmniSwitch CLI Reference Guide
September 2009
lacp linkagg partner system priority
Configures the priority of the remote switch’s dynamic aggregate group to which the local switch’s aggre-
gate group is attached.
gate group is attached.
lacp linkagg agg_num partner system priority partner_system_priority
lacp linkagg agg_num no partner system priority
Syntax Definitions
agg_num
The number corresponding to the dynamic aggregate group.
partner_system_priority
The priority of the remote switch’s dynamic aggregate group to which
the local switch’s aggregate group is attached. Possible values are
0–65535.
the local switch’s aggregate group is attached. Possible values are
0–65535.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the no form of this command to return to the priority value to its default.
Examples
-> lacp linkagg 3 partner system priority 65535
-> lacp linkagg 3 no partner system priority
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggPartnerSystemPriority
parameter
default
partner_system_priority
0
Creates a dynamic aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
groups.