Alcatel-Lucent 6850-48 Guida Di Riferimento

Link Aggregation Commands

OmniSwitch CLI Reference Guide

page 12-35

Configures the partner administrative key for a dynamic aggregate group port.

lacp agg [ethernet | fastethernet | gigaethernet] slot/port partner admin key partner_admin_key

lacp agg [ethernet | fastethernet | gigaethernet] slot/port no partner admin key

Documents that the port is 10 Mbps Ethernet.

Documents that the port is 100 Mbps Fast Ethernet.

Documents that the port is Gigabit Ethernet.

The slot number for this aggregate.

The port that the switch will initially use as the Spanning Tree virtual 
port for this aggregate.

The administrative key for the dynamic aggregation group’s remote 
partner. Possible values are 0–65535.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a partner admin key value from a slot and port associated 

with a dynamic aggregate group.

• The ethernet, fastethernet, and gigaethernet keywords do not modify a port’s configuration. See 

 for information on CLI commands to configure Ethernet 

ports.

-> lacp agg 2/1 partner admin key 0

-> lacp agg 2/1 no partner admin key

Release 6.1; command was introduced.

0