Alcatel-Lucent 6850-48 Guida Di Riferimento

Link Aggregation Commands

OmniSwitch CLI Reference Guide

page 12-39

Configures the priority for an actor port.

lacp agg [ethernet | fastethernet | gigaethernet] slot/port actor port priority actor_port_priority

lacp agg [ethernet | fastethernet | gigaethernet] slot/port no actor port priority

Documents that the port is 10 Mbps Ethernet.

Documents that the port is 100 Mbps Fast Ethernet.

Documents that the port is Gigabit Ethernet.

The slot number for this aggregate.

The port that the switch will initially use as the Spanning Tree virtual 
port for this aggregate.

The priority of the actor port. Possible values are 0–255.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an actor_port_priority value from a slot and port associ-

ated with a dynamic aggregate group.

• The ethernet, fastethernet, and gigaethernet keywords do not modify a port’s configuration. See 

 for information on CLI commands to configure Ethernet 

ports.

-> lacp agg 2/1 actor port priority 100

-> lacp agg 2/1 no actor port priority

Release 6.1; command was introduced.

0